Features of installing mosquito nets on windows and doors

Each metal plastic window or balcony door should have such an important detail as a mosquito net, which primarily protects against insects, as well as against unnecessary things such as poplar fluff or leaves being blown in. If your windows still do not have this or the old mesh is already worn out, we can help resolve this issue very quickly and inexpensively, since we produce mosquito nets ourselves, and accordingly you will not have to overpay to intermediaries. Of course, the most important thing before installing and purchasing a mesh is to measure it correctly so that it fits neatly into the window or doorway.

Details about measuring the mesh for a window: first of all, the window should be made of plastic or euro wooden, since our screens are installed only on such euro windows, secondly, you need to open the sash itself and measure the distance of the outer edge (from the sealing rubber to the elastic), accurate to the nearest millimeter, and the error should not be more than 2 mm. This will be the dimensions of the mosquito net seat, which you need to contact us for a calculation, or calculate it yourself by multiplying the width by the length and the price of the desired mosquito net. If you want the measurement to be perfect, it is better to contact our specialists who have good experience in this matter. After taking measurements, you need to fill out an application and make an advance payment in order to put into production a mesh according to your sizes, and within a day or two you can already pick up the finished product. We would like to draw your attention to the fact that there are no standard windows , they are all different, so take the dimensions carefully.

Measuring mosquito doors is actually similar to measuring a window opening, only in addition to everything that needs to be done with window doors, you also need to pay attention to the door frame, it should be flat around the entire perimeter around the light opening with a distance of 30mm (around the side on which the seal is attached rubber band), so that the mosquito door would seem to be superimposed on the frame on the opposite side of the metal-plastic doors themselves, and there would be the possibility of attaching a hanger and a magnet. We recommend calling our specialist to measure and install the doors, as this will very carefully affect the anti-mosquito door itself.

Now we’ll tell you how to install our window mosquito nets once they are already in your hands. Everything is quite simple and easy, you take the frame mesh onto the window by the special handles (which are made on the sides), stick the frame out of the window diagonally, then direct it to a special landing side (where you measured it), and secure it with special metal clips with an elastic band on all sides (don’t worry, the elastic won’t get damaged). That's it, the mesh is installed, and now you can enjoy fresh air without debris, flies, and mosquitoes.

As for installing mosquito doors, the installation is much more difficult. Skills in using a screwdriver, tape measure and pencil are required. Before installation, it is necessary to fasten the hinges to the mesh frame itself, attach it to the opening and put a mark along the edges, then fasten the mating part to the door frame itself, check the closing radii and places of contact. After this, install special magnets and an internal handle. We strongly recommend that you contact specialists for installation to avoid damage to the balcony frame (of course, this is not free).

We hope all this information will help you protect yourself from insects and fluff, as well as save your nerves, time and money, which is very important today. If you have any questions, call us and we will be happy to help. For detailed information on prices and descriptions of the mosquito nets themselves, see our product catalog.