Decorative self-adhesive PVC board Sticker wall dark gray marble OS-KL8155 SW-00001407

Dimensions of available options: 1. Full panel: 2.44 meters wide and 1.22 meters high, with a thickness of 3 millimeters (full prepayment). 2. Sets: the set contains 8 cut tiles measuring 60 by 60 centimeters each. 3. Individual tiles (for 1 piece): each tile measures 60 by 60 centimeters, but the pattern on them may vary slightly. Material: PVC (designed for interior decoration). Texture: imitation of natural marble. Weight of 1 sheet 2.44x1.22 - 19 kg. The material has the following properties: 1. Light weight, which makes it easy to use. 2. Does not absorb water, which allows it to retain its properties even in wet conditions. 3. Resistance to humid and warm environments. 4. Not susceptible to fungus, which guarantees its durability. 5. It has medium flexibility, allowing it to adapt to different shapes and contours. 6. Non-porous material does not allow moisture and other substances to penetrate. 7. Resistant to mechanical damage, which ensures its durability during use. 8. The service life is at least 20 years, which makes it a reliable and durable material. The structure of the material includes the following layers: 1. The top layer has a diamond-shaped, convex base, which improves adhesion when gluing. 2. The next layer is a monolithic foamed PVC without pores, which provides additional strength characteristics. 3. This is followed by a glossy heat transfer film, which gives the material an aesthetic shine. 4. A varnish is applied to the top layer, which gives the material additional protection and shine. 5. Protective film ensures the safety of the material during transportation and storage. Advantages of PVC boards: - The material is lightweight and flexible. - Its installation does not require special preparation, which simplifies the installation process. - The surface can be easily prepared for gluing using a primer. - It is possible to create a uniform pattern. - The material imitates natural materials such as marble and stone. - Seamless installation provides aesthetics and durability. - The material is safe to use in bathrooms. - When cutting and installing, waste generation is minimized. - For cutting, no specialized machine equipment is required; a jigsaw or grinder is enough. - Installation requires a minimum amount of building materials (only primer and glue). - The service life of the material is at least 20 years. - The material is environmentally friendly and hypoallergenic. - Possesses fire safety. - Convenience and safety during transportation and installation. - Thanks to the lightness and flexibility of the material, it can be delivered to hard-to-reach places, such as flights of stairs and passages in the apartment. - Caring for the material is simple and convenient. - Due to the thickness of the sheets, they can be compactly placed in the room before installation. - The material has thermal insulation properties. - Has a wide range of applications. Necessary tools and materials for installing PVC: 1. Level - used to check the horizontal and vertical positions when installing PVC materials, ensuring accuracy and evenness. 2. Ruler - necessary for measuring and marking when cutting and installing PVC, helps to get accurate dimensions and alignment. 3. Jigsaw (grinder) - used for cutting PVC materials to the required sizes and shapes. The jigsaw provides precise and neat cuts. 4. Silicone or acrylic glue - used for attaching PVC boards to the surface. The glue provides a strong and reliable connection, as well as tightness. 5. Pencil - used for markings and markings on PVC materials, helps determine cutting or installation locations with high accuracy. Using these tools and materials, you can achieve professional and high-quality installation of PVC materials. Installation instructions: Step 1 Make sure that the wall on which the tiles will be installed is level. Before installing tiles, the wall surface should be primed. Step 2 Place a level along the wall to ensure level placement of the material during installation. Step 3 Turn the tile over so that the back side is visible and apply adhesive to the entire back side. It is recommended to apply a layer of glue 1.5-2 mm thick. Step 4 Carefully lift the tile, preferably with the help of an assistant, and press it firmly against the wall, maintaining the level that was previously installed. Hold the tile in this position for 2 minutes before moving on to install the next tile.