Decorative strip WPC wall graphite Sticker wall 3000*150*9mm (D) SW-00001871

Decorative strip WPC wall graphite Sticker wall 3000*150*9mm (D) SW-00001871

WPC (Wood-Plastic Composite) is a composite material that combines beauty and practicality. WPC wall slats are a modern solution for interior decoration that imitates natural wood.

Advantages:

1. Moisture Resistant: WPC will not swell or warp, making it an ideal choice for kitchens, bathrooms and other wet areas.
2. Rot and Insect Resistant: WPC will not rot or attract insects, making it durable.
3. UV resistance: WPC does not fade in the sun, maintaining its original appearance for many years.
4. Attractive appearance: The decorative WPC layer realistically imitates the texture of natural wood, creating a stylish and cozy interior.
5. Easy to maintain: WPC does not require painting, treatment with antiseptics or other protective agents.
6. Environmentally friendly: WPC does not contain harmful substances and is safe for human health.

Application:

- Decorating walls in all types of residential premises (kitchen, living room, children's or bedroom, entrance).
- Decoration of commercial premises (office premises, reception areas, shops, beauty salons or fitness centers).
- Decorating furniture, doors and other flat surfaces.

Temperature range: from -50 to +80 degrees.

How to calculate the number of slats for sheathing?

1. Measure the surface area.
To do this, multiply the length of the wall by its height.
Example:
- Wall length: 3.2 m.
- Wall height: 2.7 m.
- Wall area: 3.2 m x 2.7 m = 8.64 sq.m.
2. Divide the surface area by the area of one batten.
Example:
- Area of one rail: 0.495 sq.m.
- Number of slats: 8.64 sq.m / 0.495 sq.m = 17.45.
3. Round the resulting number up. During the installation process, waste may occur, so it is recommended to add 1-2 slats to the estimated quantity.

Total: To cover a wall with an area of 8.64 sq.m. you will need 18 slats.

Installation:

1. WPC slats can be installed on plaster walls, plasterboards and wood materials.
2. Use a circular saw or jigsaw to cut the slats.
3. The slats are fastened to the surface using mounting adhesive or a construction stapler.

Care instructions:

- To clean the WPC, simply wipe it with a damp cloth.
- Do not use abrasive cleaners.