Docking adhesive 310 ml. for polyurethane Europlast

Directions for use: Clean the surface from dust with a cloth slightly moistened with water. Apply glue to the entire surface of one of the parts, connect them to each other, press tightly and fix for 4-5 seconds. Remove excess glue immediately after it appears. After complete drying, sand the joint with sandpaper. The adhesive connection remains adjustable within 30 minutes. Complete hardening after 24 hours. Conditions during work: temperature during work and the next 24 hours is not lower than +8°C. Relative air humidity is at least 40%, optimal humidity is 80%.
Construction adhesive Composition: aqueous dispersion of acrylic copolymers, mineral fillers, functional additives. White pasty consistency. Surface types: most common building materials (brick, concrete, plaster, stone, treated wood and others). Surface requirements: clean, dry, grease-free, dust-free surfaces. Humidity no more than 8%. Weak mineral substrates must be pre-strengthened with a suitable primer. Conditions during work: temperature during work and the next 24 hours is not lower than +8°C. Relative air humidity 40-80%.