Facade PU panel Sticker wall 415*15*3800mm (D) SW-00001721

Facade PU panel Sticker wall 415*15*3800mm (D) SW-00001721 - this is a modern material for finishing building facades. It is a three-layer panel consisting of two steel sheets with a protective coating and a layer of polyurethane foam between them.

Material: metal facade made of polyurethane foam (Metal-PU).
Sheet size: 415x15x3800 mm.
Area: 1,444 m2.
Weight: 1 sheet 5.42 kg.
Texture: embossed.
The material is intended for external work.

Material properties:

1. Dense, non-bending structure guarantees reliability and durability.
2. Excellent heat and sound insulation properties provide comfort and coziness.
3. Water resistance allows the material to be used in a wide variety of conditions.
4. Resistance to fading in the sun maintains its original appearance for many years.
5. Light weight makes transportation and installation easier.
6. Fire resistance makes the material safe to use.

Advantages of the material:

- Insulates and decorates at the same time: double work is not required.
- High thermal insulation: 25 mm material = 65 mm foam.
- Moisture resistance: not afraid of moisture.
- Durability: service life of 40 years.
- Corrosion resistance: does not rust.
- Environmentally friendly: safe for people and nature.
- Stylish decor: will decorate the facade of your home.
- Quick installation: saves time and effort.

The panel consists of three layers:

1. Front side

- Al-Zn steel sheet with MetalColor embossing.
- Provides high strength, corrosion resistance and aesthetic appearance.

2. Core

- Rigid polyurethane foam.
- Provides excellent thermal insulation and sound absorption.

3. Back side

- Moisture-resistant layer of aluminum foil.
- Protects against penetration of moisture and condensation.

The panel has:

- High strength and durability.
- Excellent thermal insulation and sound absorption.
- Moisture resistance.
- Aesthetic appearance.

Installation

1. Preparing the base

- Install a mounting base made of metal or wooden guides.

2. Installation of panels

- Fix the first panel horizontally from top to bottom using expansion screws or dovetail nails (at 60 cm intervals).
- Insert the second panel, groove down, into the hole of the first.
- Lightly tap the panels with a rubber mallet to ensure a tight connection.
- Secure the second panel with screws/nails.
- Repeat the process for the remaining panels.
- If necessary, cut panels to size.

3. Installing the mounting cover

- Press the lid onto the base.
- For metal lids: secure with screws and seal with waterproof glass adhesive.

4. Completion

- Remove the protective film from the panels.