Interior doors Omis Geometry 03 white silk matt

Check with the manager for the price and availability of goods!

The Cortex Geometry collection is framed panel doors, 40 mm thick.
The frame consists of jointed and glued solid coniferous wood,
Inside the canvas there is honeycomb filler.
The outside of the canvas is lined with HDF board 6mm thick.
Decorative coating – matte white Cortex film.
The ends of the canvas are covered with a 1mm thick PVC edge in the color of the decor.

Features of the paintings Geometry.
Finish: Smooth solid color Cortex film.
Frame: reinforced by using 6mm thick HDF board.
Edge: 1mm thickness, which improves the performance characteristics of the blade.
Visual appearance: abstract milling.

Attention! All measurements must be made by the installer.

To select a door leaf, you will need the following data:

1. Opening width (measured at three points and the minimum is selected):
for a canvas with a width of 600mm it should be 680-700mm
for a canvas with a width of 700mm it should be 780-800mm
for a canvas with a width of 800mm it should be 880-900mm
for a canvas with a width of 900mm it should be 980-1000mm

2. Height of the opening (measured at two points and the minimum is selected):
For a canvas with a height of 2000mm it should be 2050-2070mm

To select molded products (box, additional trim and trim), the following data will be required:

1. The thickness of the opening into which installation is planned (measured at three points and the maximum is selected)
2. Box type:
Wooden telescopic 80mm:
- allows you to cover the thickness of the opening without using an additional strip up to 120mm*
- allows you to cover the thickness of the opening using an additional “70mm” strip up to 185mm*
- allows you to cover the thickness of the opening using an additional “110mm” strip up to 225mm*

Attention! If the thickness of the wall that needs to be covered is greater than indicated above, then you can use several telescopic additional strips (consultation with the manager is required)

Wooden for additional 80mm:
- allows you to cover the thickness of the opening without using an additional 80mm strip
- allows you to cover the thickness of the opening using an additional “100mm” strip up to 170mm
- allows you to cover the thickness of the opening using an additional 150mm strip up to 220mm

Wooden for additional 100mm:
- allows you to cover the thickness of the opening without using an additional 100mm strip
- allows you to cover the thickness of the opening using an additional “100mm” strip up to 190mm
- allows you to cover the thickness of the opening using an additional “150mm” strip up to 240mm

3. Platband type:
Rectangular 70mm wide
Telescopic width 80mm and long leg 25mm

Attention! Installation of door leaves and moldings is carried out in pre-prepared openings, after interior work has been carried out.

* the size is indicated with two trims extended to the maximum.