Mirrored sun protection film for windows Sticker wall Gold 600х10000х0,08 mm SW-00002715

Mirror window film is a sophisticated coating that transforms ordinary glass into a multifunctional barrier. Operating on the "one-way mirror" principle, it provides reliable daytime privacy by concealing your interior from outside view, while maintaining an excellent view from within and filling the room with soft, natural light.

The metallized coating acts as an effective thermal shield. It reflects excess solar heat to prevent overheating during summer months and blocks harmful ultraviolet radiation. This not only creates a comfortable microclimate but also protects your interior, furniture, and electronics from premature fading.

Technical Specifications & Composition

Material: High-strength Polyethylene Terephthalate (PET)
Roll Dimensions: 600x10000 mm (Coverage area: 1.8 sq. m)
Thickness: 0.08 mm (Tolerance ±3%)
Coverage area: 600x10000 – 6 sq. m
Texture: Perfectly smooth with a distinct glossy finish

Multi-Layer Structure

1. Functional Base: A metallized PET layer. It reflects up to 80% of solar energy, blocks 99% of UV rays, and filters infrared radiation (allowing only 30% through). Visible light transmission is approximately 25%.

2. Adhesive Layer: A specialized thin adhesive activated by water. It ensures stable fixation, resistance to temperature fluctuations, and prevents edge peeling.

3. Protective Liner (Release Film): A temporary layer that protects the adhesive surface from contamination during transport. It is removed immediately before installation.

Applications

This material adheres perfectly to any smooth, non-textured surfaces (glass, acrylic).

• For the Home: Providing daytime privacy (especially for ground floors) and protecting indoor plants and textiles from sun damage.

• For Business: Reducing glare on office monitors, styling storefronts and restaurant windows, and creating sleek mirrored partitions in interiors.

Key Advantages

• Effective Privacy: During the day, only a mirrored surface is visible from the outside. Note: In the evening, when indoor lights are on, external visibility increases but remains muted.
• Climate Control: Significant reduction in air conditioning costs.
• Durability: The film is moisture-resistant, does not deform over time, and maintains its properties during temperature swings.
• Easy Maintenance: Can be cleaned easily with standard non-abrasive detergents.

Installation Instructions (Adhesive Method)

Unlike static-cling alternatives, this film uses a water-activated adhesive system.

1. Preparation: Thoroughly clean the glass with a non-alcoholic soap solution. Any speck of dust can affect the final result.
2. Cutting: Cut the film to the required size, leaving a 1–2 cm margin on all sides.
3. Wetting the Glass: Generously spray clean water onto the window surface.
4. Removing the Liner: Use two pieces of tape to separate the layers. Peel off the transparent protective liner while wetting the adhesive side with water.
5. Application: Place the film onto the wet glass and align it.
6. Fixation: Use a rubber squeegee to push out water and air bubbles, moving from the center toward the edges. Once dry, the adhesive ensures a secure bond. Carefully trim excess edges with a sharp utility knife.