Starter strip Neman for 3D MDF panels 33x2780x12 mm Ultramat White
Discounts are possible on all products in this category! Delivery throughout Kyiv and Ukraine!
268 UAH PC
Description Starter strip Neman for 3D MDF panels 33x2780x12 mm Ultramat White
Please note: the actual color of the starter strip may vary slightly from the color shown in the photo.
Neman Starter Trim for 3D MDF Wall Panels, 33x2780x12 mm
A neatly finished wall begins with a carefully defined edge. The Neman starter trim is an MDF profile fitted at the beginning of a 3D MDF wall panel installation. It forms the left-hand edge of the arrangement and receives the first panel in its groove, providing the starting point for the rest of the cladding.
Where to use it
Designed for use with compatible Neman 3D MDF panels, this trim is suitable for interior wall finishes in dry rooms. Suggested applications include living rooms, bedrooms, hallways and studies, as well as offices and reception areas. Use the panel system to create a feature wall behind a television, a decorative section behind a bed or an accent beside a workspace.
The starter trim is particularly useful when panels cover only part of a wall and the side edge remains visible. It gives the beginning of the panelled section a deliberate, neatly finished appearance.
Features
• Starter profile for installing 3D MDF wall panels.
• Grooved design connects the trim to the first panel.
• Dimensions: 33x2780x12 mm — 33 mm wide, 2780 mm long and 12 mm thick.
• Can be cut to suit the height of the panelled section.
• Made from MDF.
Installation
The supporting surface must be flat, dry and clean. Check the wall with a spirit level before installation and fit a batten framework if required. Position the starter trim on the left-hand side of the planned cladding, insert the first panel into its groove and secure the panel using the selected fixing method. For adhesive installation, use a product suitable for both MDF and the supporting surface, such as a compatible grab adhesive. Refer to the panel system instructions to determine whether mechanical fixings are suitable and where they should be positioned.
Continue fitting the remaining panels in sequence, then use a finishing trim at the opposite edge. The recommended installation temperature is +15 to +25 °C; follow the adhesive manufacturer’s requirements as well.
Use and care
For dry indoor environments. Installation in bathrooms, saunas and other high-humidity spaces is not recommended. Clean with a dry or slightly damp soft cloth and avoid abrasive cleaning products.
Neman Starter Trim for 3D MDF Wall Panels, 33x2780x12 mm
A neatly finished wall begins with a carefully defined edge. The Neman starter trim is an MDF profile fitted at the beginning of a 3D MDF wall panel installation. It forms the left-hand edge of the arrangement and receives the first panel in its groove, providing the starting point for the rest of the cladding.
Where to use it
Designed for use with compatible Neman 3D MDF panels, this trim is suitable for interior wall finishes in dry rooms. Suggested applications include living rooms, bedrooms, hallways and studies, as well as offices and reception areas. Use the panel system to create a feature wall behind a television, a decorative section behind a bed or an accent beside a workspace.
The starter trim is particularly useful when panels cover only part of a wall and the side edge remains visible. It gives the beginning of the panelled section a deliberate, neatly finished appearance.
Features
• Starter profile for installing 3D MDF wall panels.
• Grooved design connects the trim to the first panel.
• Dimensions: 33x2780x12 mm — 33 mm wide, 2780 mm long and 12 mm thick.
• Can be cut to suit the height of the panelled section.
• Made from MDF.
Installation
The supporting surface must be flat, dry and clean. Check the wall with a spirit level before installation and fit a batten framework if required. Position the starter trim on the left-hand side of the planned cladding, insert the first panel into its groove and secure the panel using the selected fixing method. For adhesive installation, use a product suitable for both MDF and the supporting surface, such as a compatible grab adhesive. Refer to the panel system instructions to determine whether mechanical fixings are suitable and where they should be positioned.
Continue fitting the remaining panels in sequence, then use a finishing trim at the opposite edge. The recommended installation temperature is +15 to +25 °C; follow the adhesive manufacturer’s requirements as well.
Use and care
For dry indoor environments. Installation in bathrooms, saunas and other high-humidity spaces is not recommended. Clean with a dry or slightly damp soft cloth and avoid abrasive cleaning products.
Delivery
- Pickup from our store: Kyiv, Vernadsky 26
- Within Kyiv: own delivery service, 1–2 days
- Ukraine: Nova Poshta or Delivery
Payment
- Cash to the courier in Kyiv
- Cash on delivery at Nova Poshta
- Visa / Master Card
